| 6 |
8,143,846 |
Siderail accessory charging system |
| 7 |
8,143,395 |
Process for the preparation of 5-substituted-8-alkoxy[1,2,4]triazolo[1,5-c]pyrimidin-2-amines |
| 8 |
8,143,237 |
Anti-cancer drugs, and uses relating for malignant melanoma and other cancers |
| 9 |
8,142,903 |
Construction boards with improved facers |
| 10 |
8,142,721 |
Test strip with slot vent opening |
| 11 |
8,142,582 |
Explosive formulation |
| 12 |
8,142,511 |
Bi-material prosthesis component |
| 13 |
8,142,510 |
Mobile bearing assembly having a non-planar interface |
| 14 |
8,142,502 |
Stable cartilage defect repair plug |
| 15 |
8,142,483 |
Flexible spinal stabilization system and method |
| 16 |
8,142,477 |
Retaining system |
| 17 |
8,142,476 |
Orthopedic distraction implants and techniques |
| 18 |
8,142,440 |
Transverse centering tool with pin placement guides |
| 19 |
8,142,439 |
Method of connecting an impactor to an orthopaedic implant |
| 20 |
8,142,438 |
Methods and instruments for interbody surgical techniques |
| 21 |
8,142,431 |
Sphincterotome cutting wire improvement |
| 22 |
8,142,366 |
Assembly for receiving body fluids, and method for the production thereof |
| 23 |
8,142,342 |
Blood separating device |
| 24 |
8,142,322 |
Transmission with hydraulically actuated splined clutch |
| 25 |
8,141,950 |
Single retractor lower anchor connection system |
| 26 |
8,141,854 |
Gas spring assembly and method |
| 27 |
8,141,601 |
Manual filling aid with push button fill |
| 28 |
8,141,551 |
Mouthpiece and flow rate controller for intrapulmonary delivery devices |
| 29 |
8,141,297 |
Dual action power drive unit for a vehicle door |
| 30 |
8,141,188 |
Brake system for wall arm |
| 31 |
RE43,252 |
High efficiency low pollution hybrid Brayton cycle combustor |
| 32 |
D656,221 |
Fuel nozzle |
| 33 |
D656,065 |
Fluted vase |
| 34 |
8,140,738 |
Flash memory interface device |
| 35 |
8,140,294 |
Temperature estimations in a blood glucose measuring device |
| 36 |
8,138,649 |
Magnet support and retention system for hybrid rotors |
| 37 |
8,138,160 |
Reagents, methods and systems to suppress pro-inflammatory cytokines |
| 38 |
8,137,980 |
On-board control for analytical elements |
| 39 |
8,137,905 |
Apparatus and method for determining an analyte in a fluid |
| 40 |
8,137,718 |
Probiotic infant products |
| 41 |
8,137,608 |
Crosslinked polymeric material with enhanced strength and process for manufacturing |
| 42 |
8,137,418 |
Vegetable lipid-based composition and candle |
| 43 |
8,137,407 |
Tibial knee component with a mobile bearing |
| 44 |
8,137,403 |
Hemi-interbody spinal fusion implants manufactured from a major long bone ring |
| 45 |
8,137,382 |
Method and apparatus for coupling anatomical features |
| 46 |
8,137,361 |
Method and apparatus for constant force tensor/ligament balancer |
| 47 |
8,137,358 |
Method and apparatus for positioning an implant |
| 48 |
8,137,354 |
Localized cartilage defect therapy |
| 49 |
8,137,320 |
Securement for a surgical site marker and deployment device for same |
| 50 |
8,137,291 |
Wire guide having distal coupling tip |
| 51 |
8,137,277 |
Volumetric measurement and visual feedback of tissues |
| 52 |
8,136,803 |
Armover clamp assembly |
| 53 |
8,136,801 |
Adjustable tension spring anchor with rotatable head |
| 54 |
8,136,740 |
Thermodynamic cycles using thermal diluent |
| 55 |
8,136,728 |
Medical device tracking system with tag and method |
| 56 |
8,136,654 |
Auger conveyer |
| 57 |
8,136,183 |
Modular multiple bed unit |
| 58 |
8,136,176 |
Skimmer vent for pool with pool cover or pool liner |
| 59 |
D655,791 |
Faucet body |
| 60 |
D655,790 |
Faucet handle |
| 61 |
D655,789 |
Faucet |
| 62 |
D655,605 |
Container lid with a closure |
| 63 |
D655,479 |
Shirt for a medical patient |
| 64 |
8,135,186 |
Method and system for image reconstruction |
| 65 |
8,135,163 |
Balanced armature with acoustic low pass filter |
| 66 |
8,134,703 |
Apparatus for the quality control of nozzles |
| 67 |
8,134,468 |
High reliability pest detection |
| 68 |
8,133,907 |
Pyridine derivatives as dipeptedyl peptidase inhibitors |
| 69 |
8,133,789 |
Short-channel silicon carbide power mosfet |
| 70 |
8,133,743 |
Phenobarbital derivatives useful in immunoassay |
| 71 |
8,133,553 |
Process for forming a ceramic layer |
| 72 |
8,133,421 |
Methods of making shaped load-bearing osteoimplant |
| 73 |
8,133,389 |
Method and apparatus for preparing platelet rich plasma and concentrates thereof |
| 74 |
8,133,279 |
Methods for treating an annulus defect of an intervertebral disc |
| 75 |
8,133,235 |
One-way bearing cable tensioning tool |
| 76 |
8,133,234 |
Patient specific acetabular guide and method |
| 77 |
8,133,233 |
Bone protector, kit and method |
| 78 |
8,133,228 |
Chisel system for osteochondral implants and a surgical procedure involving same |
| 79 |
8,133,190 |
Weldable wire guide with distal coupling tip |
| 80 |
8,133,143 |
Gear reducer electric motor assembly with internal brake |
| 81 |
8,132,997 |
Lift apparatus mountable on a vehicle |
| 82 |
8,132,799 |
Pin clamp accessories |
| 83 |
8,132,798 |
Pin clamp |
| 84 |
D655,462 |
Animal feeder tray |
| 85 |
D655,223 |
Buckle assembly |
| 86 |
8,132,101 |
Method and system for data selection and display |
| 87 |
8,131,474 |
Method and system for investigating glucose metabolism |
| 88 |
8,129,945 |
System and method for balancing a state of charge of series connected cells |
| 89 |
8,129,645 |
Dynamically self-stabilizing elastic keyswitch |
| 90 |
8,129,539 |
Process for the preparation of 2-substituted-5-(1-alkylthio)alkylpyridines |
| 91 |
8,129,518 |
Synthetic polysaccharide antigens for immunological intervention in disease |
| 92 |
8,129,459 |
Soy methyl ester polystyrene blends for use in concrete |
| 93 |
8,129,440 |
Antioxidant stabilized crosslinked ultra-high molecular weight polyethylene for medical device applications |
| 94 |
8,129,410 |
Benzisoxazole piperidine compounds and methods of use thereof |
| 95 |
8,129,369 |
Antifungal compounds containing benzothiazinone, benzoxazinone or benzoxazolinone and process thereof |
| 96 |
8,129,195 |
Method for the production of an analytical element |
| 97 |
8,129,138 |
Method and apparatus for determining an analyte in a liquid sample |
| 98 |
8,129,046 |
Intrinsically safe battery pack and system |
| 99 |
8,128,927 |
Methods of using TGF-.beta. 1 binding compositions |
| 100 |
8,128,708 |
Multi-formed collagenous biomaterial medical device for use in wound care |
| 101 |
8,128,704 |
Femoral trochlea prostheses |
| 102 |
8,128,703 |
Fixed-bearing knee prosthesis having interchangeable components |
| 103 |
8,128,699 |
Spinal implant and methods of implantation and treatment |
| 104 |
8,128,686 |
Branched vessel prosthesis |
| 105 |
8,128,682 |
Medical device with tensionably attached remodelable material |
| 106 |
8,128,678 |
Stent having less invasive ends and improved radial force |
| 107 |
8,128,671 |
Variable flank bone screw |
| 108 |
8,128,665 |
Orthopedic implant apparatus |
| 109 |
8,128,658 |
Method and apparatus for coupling soft tissue to bone |
| 110 |
8,128,636 |
Device and method for removing lumenless leads |
| 111 |
8,128,593 |
Removing fluid from a bodily tissue via a catheter with circumferential concave grooves |
| 112 |
8,128,591 |
Multiple component mixing and delivery system |
| 113 |
8,128,424 |
Electrical receptacle assembly |
| 114 |
8,128,407 |
Method and system for teaching math |
| 115 |
8,127,964 |
Container apparatus |
| 116 |
8,127,919 |
Scissors lift guard for a sheet material conveyor |
| 117 |
8,127,649 |
Paper pushing device |
| 118 |
8,127,645 |
Method and apparatus for machining parts of partial revolution |
|
119
|
8,127,566
|
Multiple airflow pattern water source geothermal heat pump unit
|